Opening at Frisco Station? Build a Secure, Opening-Ready Technology Foundation.

Begin technology planning as soon as your lease and space plan are confirmed, ideally before interior construction starts. Early planning lets us coordinate cabling pathways, network rooms, and provider timelines with the base building and your general contractor. Because Frisco Station is an active, multi-building campus, involving a low-voltage partner during design avoids rework, missed conduit, and rushed installations close to opening.

No, general contractors typically handle building construction and rough-in but not the full structured cabling, network, Wi-Fi, camera, and access-control systems your business runs on. Those low-voltage and IT systems are usually a separate scope. Metro Relay handles that layer and coordinates directly with your GC so pathways, power, and equipment rooms are ready when cabling and devices are installed.

Order business internet as early as possible, often 60 to 90 days before you need it live, because circuit delivery to a specific suite can take longer than expected. New buildings and tenant spaces sometimes require provider construction or cross-connects that add weeks. We help you identify realistic lead times so your connection is tested and working before staff training and opening day.

Yes, we can research which carriers and service types are available to your specific building and suite. Serviceability varies by address and even by floor, so we confirm what fiber, fixed wireless, and business broadband options actually reach your space rather than relying on general coverage maps. This helps you compare options and set realistic install timelines before committing.

Yes for most businesses, a second internet connection is worth it wherever downtime disrupts operations, such as medical offices, surgical centers, hotels, and restaurants. We design failover so traffic automatically shifts to the backup circuit if the primary fails, ideally using a different carrier or technology. This keeps payment processing, scheduling, and clinical systems running during an outage.

Yes, we review floor plans and architectural drawings during design to plan cabling routes, wireless coverage, camera positions, access-control doors, and the network room. Reviewing early lets us flag conduit, power, and space needs while changes are still inexpensive. For tenants building out space at Frisco Station, this coordination with your architect and GC prevents costly gaps discovered late in construction.

We need your floor plan, intended use of each area, expected headcount, and a list of systems you plan to run such as POS, phones, cameras, badge readers, or clinical equipment. Details on your internet provider, any corporate IT standards, and your target opening date also help. With that, we produce a cabling, network, and device plan sized to how your space will actually operate.

Yes, we perform on-site walkthroughs across the Dallas-Fort Worth area, including Frisco. Walking the space lets us verify conditions against the drawings, confirm equipment-room location, check wireless obstacles, and identify where cabling and devices should go. Walkthroughs are especially useful in a multi-phase campus where base-building conditions and construction progress differ from one building to the next.

Yes, structured cabling and fiber are core services. We install and certify copper and fiber backbone, horizontal cabling to workstations and devices, and connections between equipment rooms. Every run is labeled, tested, and documented to industry standards. This cabling foundation supports your network, Wi-Fi, phones, cameras, access control, and clinical or point-of-sale systems for medical, office, hotel, and restaurant tenants alike.

Yes, we design and install business-grade Wi-Fi engineered for your specific floor plan and usage. Rather than guessing at coverage, we plan access-point placement around walls, materials, and device density, then verify signal after installation. This matters for spaces like medical offices with mobile carts, hotels with guest roaming, and offices with heavy video and cloud use.

The number depends on your square footage, wall construction, and how many devices connect at once, not just floor area. A dense medical office or a busy restaurant needs more access points per square foot than a quiet office. We determine the right count through a coverage plan based on your layout and expected usage, then confirm real-world performance after install.

Yes, we install and configure switches, routers, firewalls, and wireless controllers, and we mount and organize them in your equipment room. We can provide the hardware or work with equipment you or your corporate IT team specify. Everything is labeled and documented so future support and expansion are straightforward as your space or additional Frisco Station locations come online.

Yes, we regularly act as the local hands-on team for corporate or out-of-state IT departments. We follow your naming conventions, security standards, and equipment specifications, and coordinate on configuration, testing, and cutover. This is common for office and healthcare tenants whose IT leadership sits elsewhere but who need reliable on-site cabling, installation, and field support in the Dallas-Fort Worth area.

Yes, we frequently serve as the local installation and support partner for brands entering the Dallas-Fort Worth market. We handle the on-site cabling, network, and device work while coordinating with your headquarters, national vendors, and rollout standards. For a company opening its first Frisco-area office, clinic, or hospitality location, we provide the local presence that remote teams cannot.

Yes, we can receive, inventory, and stage network and technology equipment ahead of installation. Pre-staging lets us configure devices, verify shipments, and resolve missing or damaged items before crews are on site. This keeps installation efficient and reduces surprises during the tight window before a tenant space opens, which matters on an active construction campus like Frisco Station.

Yes, we coordinate the various vendors so cabling, internet, POS, phones, and other systems come together on schedule. We confirm what each vendor needs, when they need it, and where their equipment connects, then align it with construction and opening plans. Acting as the single technical point of contact reduces finger-pointing and keeps your opening timeline on track.

We provide the network, cabling, and connectivity that point-of-sale systems depend on rather than the POS software or terminals themselves. We install the wired and wireless infrastructure, segment payment traffic from guest and staff networks, and coordinate with your POS vendor so their equipment connects reliably on opening day. This applies to restaurant and retail tenants across Frisco Station and the wider DFW area.

Yes, payment systems and guest Wi-Fi should be on separate, isolated networks. Keeping point-of-sale traffic off the same network guests use improves security, supports payment-card compliance, and prevents guest activity from slowing critical systems. We design this segmentation into the network from the start for restaurant and retail spaces so it does not have to be retrofitted later.

Yes, we build networks that support your payment-card security obligations, including segmenting payment traffic, securing wireless, and controlling access between systems. We are not a compliance auditor, but we implement the network controls your POS provider and PCI requirements call for. This is relevant for restaurant, retail, and hospitality tenants handling card payments in the Frisco Station area.

Yes, we install and configure IP camera systems, including camera placement, cabling, recording, and remote viewing. We plan coverage around entrances, parking, back-of-house, and sensitive areas based on how your space is used. Cameras run on structured cabling we install and test, so image quality and storage perform reliably for office, medical, hospitality, and retail tenants.

Yes, we install access-control systems that manage entry through badge readers, electronic locks, and door controllers. We plan which doors need controlled access, run the required cabling, and configure permissions and schedules. This is especially important for medical offices, surgical centers, and corporate suites where restricting access to clinical, records, and equipment areas is a routine security requirement.

Plan cameras and access control during design, alongside cabling, not after construction is finished. Both need cabling pathways, power, and door hardware coordinated with the general contractor and often the base building. Deciding door and camera locations early avoids cutting into finished walls and ceilings later. On a phased campus, planning these systems up front keeps each tenant buildout clean and on schedule.

Yes, we install the cabling and network connections these systems require and can install and configure many of them directly. This includes IP phones, digital signage, conference-room displays, and audio for offices, hotels, and restaurants. Where a specialized AV integrator is involved, we provide the structured cabling and network foundation their equipment depends on and coordinate the connection points.

We recommend equipment-room and device locations based on your floor plan, cabling distances, power, cooling, and security, then confirm them with you, your architect, and your general contractor. Central, protected placement keeps cable runs within standards and simplifies future support. Deciding this early ensures the space is properly sized, powered, and ventilated before cabling begins in your Frisco Station suite.

Cabling, network, Wi-Fi, internet, and the systems staff will use should be installed, tested, and confirmed working before training starts. Training on systems that are not fully live wastes time and creates confusion. We aim to have your technology validated ahead of the training window so employees practice on the real, functioning setup they will use when the space opens.

During opening-day validation we verify that every system works under real conditions, not just in isolation. We test internet and failover, Wi-Fi coverage, network performance, POS or clinical connectivity, phones, cameras, and access control, and confirm devices communicate as intended. We resolve issues on the spot so your team opens with technology that has been checked end to end, not assumed to work.

Yes, we can have technicians on site during your opening to respond immediately to any technology issue. Openings surface problems that only appear under live use, such as connectivity load, device conflicts, or last-minute changes. Having us present means issues are fixed in minutes rather than through remote troubleshooting, which is valuable for medical, hospitality, and retail tenants on their first operating days.

You receive labeled cabling records, network diagrams, equipment lists, test and certification results, and configuration details for the systems we install. This documentation makes future troubleshooting, expansion, and vendor support far easier. Whether your IT is in-house, corporate, or outsourced, clear records mean the next person working on your system understands exactly how your Frisco Station space is built.

Yes, we work alongside vendors you have already chosen, including POS providers, phone and AV vendors, security integrators, and your internet carrier. We coordinate their requirements with the cabling and network we install so everything connects properly. You do not have to replace existing relationships; we integrate our work with theirs and keep the overall technology plan aligned.

Yes, we can step into a project that another provider started or left incomplete. We first assess what has been installed, test it, and document what works and what does not, then build a plan to finish it correctly. This is common when timelines slip or a prior vendor falls short, and we focus on getting your space to a reliable, documented state.

Cost depends on your square footage, number of drops and devices, systems included, and how much cabling and equipment your space requires. A small office differs greatly from a medical suite with clinical systems, cameras, and access control. We provide a detailed quote after reviewing your plans and requirements so you see exactly what is included rather than a vague estimate.

Yes, we support businesses with several locations and can standardize cabling, networks, and equipment across them. Consistent setups make support, training, and expansion easier as you grow. If you operate elsewhere in Dallas-Fort Worth in addition to a Frisco Station space, we can apply the same documented standards so every site behaves the same way for your staff and IT team.

Yes, we offer ongoing managed IT and support after opening, including monitoring, troubleshooting, moves and changes, and on-site field service. Technology needs maintenance and occasionally breaks, and having a local partner who already knows your setup means faster resolution. You can rely on us for day-to-day support or as the local hands for your corporate IT team.

Yes, we provide the cabling, networks, Wi-Fi, cameras, and access control that medical offices and ambulatory surgery centers depend on. Publicly available project information indicates Frisco Station's Health and Wellness District is building medical office space, and clinical tenants of this type typically need reliable, secure connectivity for imaging, scheduling, and records. We build that infrastructure and coordinate with clinical equipment vendors and corporate IT.

Yes, we can support laboratory and life sciences tenants with structured cabling, secure networks, and controlled access. Publicly available project information indicates life sciences space is planned within the Health and Wellness District, though it is a stated plan rather than built or leased today. If and when such space comes online, we provide the connectivity and security infrastructure lab and research operations require.

We design networks with security built in, including segmented traffic, secured wireless, firewalls, and access-control systems that manage who can enter which areas physically. For identity and access on the network side, we coordinate with your IT team's authentication and policy standards. These are our standard service categories, applied to whatever a medical, corporate, or hospitality tenant at Frisco Station actually needs, not requirements the development has announced.

The first step is a conversation about your space, timeline, and the systems you plan to run, followed by a review of your floor plan or a walkthrough. From there we outline the cabling, network, and devices your Frisco Station space needs and how to coordinate with your general contractor and vendors. Reaching out early, before construction is underway, gives you the most flexibility and the smoothest opening.